User guide

Page 34 of 57
PIKAInlineMM
The PIKA InlineMM includes four analog ports with echo cancelation.
To Configure the PIKA InlineMM
1. Follow the steps in the Installing Analog PCI Cards
section if your PCI card is not
already physically installed in your Evolution PBX server.
2. At the Evolution PBX server terminal screen, type installpika to install the
PIKA drivers (note that there are no spaces).
The server will automatically install the drivers and reboot the system.
3. Login to the Web interface and configure the card using the same information
provided for the Digium TDM400P
but select Analog- PIKA rather than Analog-
TDM400P in step 3.
RhinoR4FXO
The Rhino R4FXO card includes four analog ports.
To Configure the Rhino R4FX0
1. Follow the steps in the Installing Analog PCI Cards
section if your PCI card is not
already physically installed in your Evolution PBX server.
2. At the Evolution PBX server terminal screen type installrhino to install the
Rhino drivers (note that there are no spaces).
The server will automatically install the drivers and reboot the system.
3. Login to the Web interface and configure the card using the same information
provided for the Digium TDM400P
but select Analog-R4FXO rather than Analog-
TDM400P in step 3.
SangomaA200D
The Sangoma A200D card is modular and can accept up to 24 analog ports.
To Configure the Sangoma A200D
1. Follow the steps in the Installing Analog PCI Cards
section if your PCI card is not
already physically installed in your Evolution PBX server.
2. At the Evolution PBX server terminal screen type installsangoma to install
the Sangoma drivers (note that there are no spaces).
The server will automatically install the drivers and reboot the system.
3. Login to the Web interface and configure the card using the same information
provided for the Digium TDM400P
but select Analog-A200D rather than Analog-
TDM400P in step 3.