User guide

Page 2 of 57
Overview
This guide is an overview of installing and configuring Evolution PBX 3.0 as a basic PBX
using standard trunks (analog, T-1, or VoIP over broadband) and standard SIP
compatible, VoIP telephones and analog terminal adapters (ATAs).
System Requirements
Evolution PBX 3.0 requires a dedicated personal computer or server with the following
minimum requirements:
• x86 Intel Pentium compatible Computer
• 600 MHz minimum, 1 GHz or better recommended
• 512 MB RAM minimum 1 GB or better recommended
• 4 GB Hard Drive minimum, 10 GB or more recommended
• CD-ROM or DVD-ROM Drive for software installation (a CD burner is also required
if you select to download and create your own installation disk)
• Internet Access
• Other telephony devices such as phones and phone line hardware are required
for many features but are not required to install and setup a basic system.
General Support
If you have questions or need technical assistance with Evolution PBX call (888)
587-5750 or send an Email to [e-mail]
.
If you have questions about third party hardware or software please visit the following
Websites:
• Snap: http://www.snapanumber.com
• iView: http://www.i9technologies.com/
• Cisco VoIP Telephones: http://www.cisco.com
• CounterPath Software Telephones - http://www.counterpath.com
• Digium PCI Cards: http://www.digium.com
• Linksys Analog Terminal Adapters and VoIP telephones: http://www.linksys.com
• Polycom VoIP Telephones: http://www.polycom.com
• Draytek Routers: http://www.draytek.us
• Sangoma PCI Cards: http://www.sangoma.com
• Rhino PCI Cards: http://www.rhinoequipment.com/
My Evolution PBX Doesn’t Do That!
Some features and configuration options in this document may only be available with a
recent software upgrade available from Intuitive Voice Technology. Email
[e-mail]
to learn more about Evolution PBX upgrades (please
explain the feature that you are interested in).
Errata
Please report errors or confusing descriptions by sending an Email to
[e-mail]
.