User guide
Page 19 of 57
To Configure Linksys SPA Telephones
1. On the SPA telephone, press the Page Settings button then scroll down and
select Network category and the IP Address your Linksys telephone acquired
from your network displays.
2. Write down the IP Address, open a Web Browser and enter the IP Address (for
example, http://192.168.2.71) into the Address bar.
3. Press Enter and the Info tab of the Linksys Telephone Configuration window
displays.
4. Click Admin Login, click Advanced then click Ext 1 to configure the SIP
settings.
5. In the Line Enable field, select Yes.
6. In the SIP Port field, enter 5060.
7. In the Proxy field enter Evolution PBX’s IP Address (for example,
192.168.165.100)
8. In the Register field, select Yes.
9. In the User ID field, enter the extension number (for example, 1020)
10. In the Password field, enter the password provided by Evolution PBX you wrote
down when you created your default extension.
11. In the Use Auth ID field, select No.
12. Click Save Settings and the telephone will save, reboot, and automatically
register with Evolution PBX.
LinksysSPATelephoneSettings
Setting Description
Caller ID Name Text Evolution PBX will send as caller ID name for all calls that this
extension makes internal and external.
Caller ID Number Text Evolution PBX will send as caller ID number for all calls that this
extension makes internal and external.
Record Calls Yes will record calls made directly to this extension. No will not record
calls for this extension.
MAC Address 12 character MAC Address of the telephone configured with this
extension.
Mailbox Personal creates a voicemail account with the same number as this
extension. Selecting a number will assign that voicemail account to be
this extension’s voicemail account.
Time Zone The time zone of the telephone (Hawaii, Alaska, Pacific, Arizona,
Mountain, Indiana, Central, Eastern, Atlantic). Auto configured telephones
will use this setting to automatically calculate the correct time and date.
Paging Enabled will include this extension in the permission to be paged.
Disabled will prevent this extension from being paged.
Remote Phone Yes configures Evolution PBX and telephone auto configurations for
remote use (a telephone at a different location). No configures Evolution
PBX and telephone auto configuration files for local use (default).
IP Address Reserved for future use
Heartbeat Advanced. The duration for keep-alive messages between Evolution PBX
and the telephone (options = No, 1000, 2000, 3000, 4000, 5000).
Outbound Internal Only permits this extension to only make internal calls (extension
to extension), Internal-Local permits this extension to make internal and
local calls (per the Outbound Dial Map route Local), Internal-Local-Toll
permits this extension to make any type of call that Evolution PBX is
configured to allow (default).
Codec Set the CODEC to use for this extension (G711 (USA), G729
(Licensed**)). ** requires the purchase of a license, contact Intuitive
Voice.