User guide
Page 18 of 57
ConfiguringXLite(v3.0)orEyeBeamSoftphones
To Configure CounterPath X-Lite (v3.0) or EyeBeam Softphones
1. Open X-Lite, click Menu then select Sip Account Settings... and the SIP
Accounts window displays.
2. Click Add... and the Properties of Account window displays.
3. In the User name field enter the extension number that you are configuring.
This number will be listed as the Username on the popup window called Generic
Device Settings that Evolution PBX provides after you click Save when configuring
a SIP-Generic-Device.
4. In the Password field, enter the password for this extension.
5. In the Domain field, enter the IP Address of your Evolution PBX server. This IP
Address is also listed on the Evolution PBX popup window as the SIP Address,
Proxy Address, and Outbound Address.
6. In the Domain Proxy area, check Register with domain and Receive
incoming calls.
7. In the Set send outbound via field, select domain.
Note: All other settings are optional.
8. Click OK to save your settings.
9. Click Close to close the SIP Accounts window and the phone will automatically
register with Evolution PBX and connect.
ConfiguringLinksysSPATelephonesforEvolution
The Linksys SPA telephones are SIP telephones that are compatible with Evolution PBX.
Current supported models include the SPA962, SPA942, SPA941, SPA922, SPA921, and
the SP901.
To Configure a Basic Extension for Linksys SPA Telephones in Evolution PBX
1. Login to Evolution PBX, click the Resources tab then click Phone Extensions.
2. In the New Device field, select VoIP--GENERIC SIP- and the Modify Phones
window displays.
3. In the Extension field, select an available extension.
4. In the Caller ID Name field, enter the name you want to be passed as this
extension’s caller ID text.
5. In the Caller ID Number field, enter the number you want to be passed as this
extension’s caller ID number.
6. In the MAC Address field, enter the MAC Address from the back of the phone
(the address is twelve, hexadecimal digits).
7. In the Time Zone field, select the appropriate time zone for the time zone where
the phone will be located.
8. In the Remote Phone field, select Yes if the phone will not be on the same
subnet as the Evolution PBX server (for example, if the phone belongs to a user
that is located at a remote location). Select No if this is not the case.
Note: The other options on the Modify Phones frame are optional or advanced.
9. Click Save.
10. Write down the device settings for your new extension that are displayed on the
screen. These settings will be used to configure your phone.