User guide

Page 16 of 57
5. Set Server Type to Trivial FTP then press Ok to exit.
6. Set Server Address to the IP Address of your Evolution PBX server then press Ok to
exit.
7. Press Exit twice or until you are asked if you want to Exit w/o Save or Save
Config.
8. Select Save Config.
9. Select Exit then select Restart Phone...
10. Press Yes to verify you want to restart the phone and the phone will reboot,
automatically update its firmware (if necessary), and download its configuration
from Evolution PBX. Upon completion, the phone will be ready to use.
PolycomSoundPointIPTelephoneSettings
Setting Description
Caller ID Name Text Evolution PBX will send as caller ID name for all calls that this
extension makes internal and external.
Caller ID Number Text Evolution PBX will send as caller ID number for all calls that this
extension makes internal and external.
Record Calls Yes will record calls made directly to this extension. No will not record
calls for this extension.
MAC Address 12 character MAC Address of the telephone configured with this
extension.
Mailbox Personal creates a voicemail account with the same number as this
extension. Selecting a number will assign that voicemail account to be
this extension’s voicemail account.
Time Zone The time zone of the telephone (Hawaii, Alaska, Pacific, Arizona,
Mountain, Indiana, Central, Eastern, Atlantic). Auto configured telephones
will use this setting to automatically calculate the correct time and date.
Paging Enabled will include this extension in the permission to be paged.
Disabled will prevent this extension from being paged.
Remote Phone Yes configures Evolution PBX and telephone auto configurations for
remote use (a telephone at a different location). No configures Evolution
PBX and telephone auto configuration files for local use (default).
IP Address Reserved for future use
Heartbeat Advanced. The duration for keep-alive messages between Evolution PBX
and the telephone (options = No, 1000, 2000, 3000, 4000, 5000).
Outbound Internal Only permits this extension to only make internal calls (extension
to extension), Internal-Local permits this extension to make internal and
local calls (per the Outbound Dial Map route Local), Internal-Local-Toll
permits this extension to make any type of call that Evolution PBX is
configured to allow (default).
Codec Set the CODEC to use for this extension (G711 (USA), G729
[Licensed**]). ** requires the purchase of a license, contact Intuitive
Voice.
For more information on how to use the Polycom telephones, contact Intuitive Voice
http://www.intuitivevoice.com/support.php
and download the “Evolution PBX User Guide.
You may also find additional information on Polycom phones on the Polycom Website at
http://www.polycom.com/products_services/1,1443,pw-34-182,00.html
.
ConfiguringaGenericDevice(CounterPathXLiteandEyeBeam)forEvolutionPBX
CounterPath X-Lite and EyeBeam software telephones (softphones) may be configured
for Evolution PBX as SIP Generic devices. Use the following steps to set up an extension
in Evolution PBX for a CounterPath softphone (X-Lite is shown but configuration is
similar for EyeBeam):