User manual

Triplex Real Time PC-look DVR Board

1) Alarm Out ON/OFF

You can set to enable (ON) or disable (OFF) the outbound signal from the DVR.

2) Sensor ON/OFF

When DVR detects signals from external sensors, DVR will beep or OSD to get your attention.

- BEEP + OSD : Beeps and shows “AL” mark together in the channel with video loss.

- OSD : On-Screen-Display only

- OFF : Disables to activate the alarm action

3) Video Loss BEEP+OSD/ OSD/ OFF

If video signal from the cameras does not reach the DVR, a beep will sound to get your attention.

- BEEP+OSD : Beeps and shows “L” mark together in the channel with video loss.

- OSD : On-Screen-Display only

- OFF : Disables to activate the alarm action

4) Motion BEEP+OSD/ OSD/ OFF

When DVR detects motion on a certain part of the screen, DVR will beep or OSD to get your attention.

- BEEP + OSD : Beeps and shows “MO” mark together in the channel with video loss.

- OSD : On-Screen-Display only

- OFF : Disables to activate the alarm action

• To return to main menu, press MENU button

6.4.3 Event Action

To select notice method in order to make users get more attention when event recording occurs.