User Manual

Under-Counter Beverage Cooler
W31401000 E (Jan 2019) - 8 -
3.3 Cleaning the Condenser
Condenser Cleaning instructions for GSP0 and GSP1 Series:
Please open the door of the cabinet and find the air filter which is located in the
bottom grille.
Remove the filter by withdrawing upwards being careful not to damage the delicate mesh
fabric.
Wash the filter clean under a tap or in a basin.
Dry carefully and replace the filter in its slot being sure that the locating pins engage
in the correct position.
Close the door carefully, ensuring that it does not touch the filter.
Condenser Cleaning instructions for GSP2 and GSP3 Series
Caution! Unplug the cooler from
the mains power before proceeding
any further.
1. Remove the compressor compartment
cover by undoing the retaining screws.