Instructions / Assembly

39
ALARMS: The current alarms function allows you to see any
problems that have been detected by your water heater. Also,
by selecting on the current alarm you can press “more info” to
read more on the current problem of your water heater. Alarm
history allows you to see any of the previous alarms that have
gone off in the past and give you the ability to clear those
previous alarms.
ALARM HISTORY: The alarm history function allows you to see
the previous alarms that have been detected by your water
heater in the past.
SYSTEM HEALTH: The system health function allows you to see
the current health of your hot water heater’s combustion health.
The combustion health has three levels of health:
SERVICE ALERTS: By selecting the Service alerts function you
will be able to adjust how often you want to be alerted to drain
and inspect the tank, clean the drain trap, check the venting,
and to replace the neutralizer.
current alarms
A007 Exhaust Switch open. Check Wiring/Venting
more
info
clear
By selecting “more info” you
can be given a more in-depth
explanation of the current alarm.
The health of your system’s combustion system and overall health
can be seen here. This screen be accessed by tapping the health
indicator icons on the home screen.
This symbol will appear on your home
screen if your combustion health is
critical. Pressing this icon will take the
user to the Health Status Screen
By selecting an option and then using the up
and down arrow, you can set how often you’d
like to be alerted to system maintenance.
Trouble-Shooting
A007 Exhaust Switch open. Check Wiring/Venting
Check switch wiring and venting. If problem
persist, please contact technical support or
service provider.
alarm history
14:48:13 01/11/17 A007 Echaust Switch open. Check wiring/venting
clear
COMBUSTION HEALTH:
1. Normal operation - no action needed
2. Reliability Decreasing - begin planning for service and/or
replacement.
3. Needs Servicing - contact your service provider
system health
(typical 10K cyc/yr)
(typical 2K hrs/yr)
Combustion Health Status: Operating Normally
Lifetime Heating Cycles:
Lifetime Run Time Hours:
1
0.0
baseline init
Status: Standby
StatusSettings
warm hot very hot
Disable
120°
Service
USER INTERFACE