Instructions / Assembly

37
BASIC SETTINGS: The basic settings in your water heater can
allow you to change the temperature unit, screen adjustment
lock/unlock, enabling/disabling the alarm beep, and your
EcoNet network instance. Simply select the setting by tapping
it, and press the Up/Down arrows to make adjustments. WiFi
setup can be accessed from this screen as well.
CONFIGURATION SETTINGS: The configuration settings on your
water heater allows you to control the heating mode, setting the
recirculation pump, auxiliary input/output, enabling/disabling
modulation, and how your hot water heater reacts to a detected
leak.
The setting can be highlighted by tapping and then adjusted
with the up/down arrows.
The heating mode can be set as Normal or Max. In Max mode,
the heater can deliver more hot water by heating the water
sooner following a draw. Max mode uses more energy than
Normal mode. If selected, Max mode will timeout after 20
minutes, and the heater will return to Normal mode.
Recirculation Pump Configuration can be set to the following:
Off - use this setting when the recirculation pump is not in use,
or not installed.
On - use this setting to manually turn on the pump. Useful for
testing the setup. Not recommended for general use.
Schedule - The recirculation pump will run on a 15 min On/15
min Off cycle whenever the heater is set to the "Home" mode
(see SCHEDULE SETTINGS). When the heater is in an Away
mode, the recirculation pump will not run.
On Demand - The recirculation pump can be triggered to run
from the mobile app. When triggered from the app, the pump
will run for 15 min.
This water heater has a modulation algorithm that can be
disabled by tapping ‘No’ in front of Modulation Disabled and
making adjustments by tapping the up/down buttons.
SCHEDULE SETTINGS: The schedule settings allows you to
control when your hot water heater will be enabled/disabled.
Your heater allows you to select a day you want and set the
times when the heater will be in use. You can also copy/paste
the day you select and apply it to other days as well.
TIME/DATE SETTINGS: By selecting time/date you can change
the water heaters current set time. You can also select the
daylight savings time function to automatically adjust the time
for daylight savings.
STATUS MENU
The Status screen provides information on the current operating
status, diagnostics and sensors. This screen also provides
information on the WiFi status.
basic settings
Temperature Display
Screen Adjustment Lock?
Beep On Alarm
EcoNet Network Instance
Elevation
Fahrenheit
No
Enabled
1
Normal
config. settings
Heating Mode
Recirc. Pump Config
Aux Output Select
When Leak Detected
Shutoff Valve Config
Max
On Demand
Recirc. Pump
Alarm Only
Not Installed
schedule settings Wed. Jan.11, 2:49 pm
Morning:
Night:
Mon.
08:00 am
06:00 pm
Time
Occupied
Occupied
Schedule
Tue.
copy
day
paste
day
cancel
Wed. Thu. Fri. Sat. Sun.
set to time and date
accept
D.S.T.
enabled
:
10 54 am
:
Jan. 11 2017
The up/down arrows enable
you to adjust the time of the
period run times.
By selecting a day and then accessing
the copy function, you can paste that
day’s settings onto other
The up/down arrows allow
you to control the time,
month, day, and year.
The D.S.T function allows you
to adjust the time for daylight
savings time.
USER INTERFACE
By pressing the Status button, you will be
taken to a prompt showing the state of your
water heater’s many features.
Status: Standby
StatusSettings
warm hot very hot
Disable
120°
Service