Instructions / Assembly

18
Alternate Horizontal Vent Terminal Installation
-B-
d .008
d .010
Rear of Termination Flush
with Outside of Wall
Outside of
Building
Inside of
Building
Raise horizontal pipe
upwards 1/8 in. per foot
(10 mm per m) min.
Raise horizontal pipe
upwards 1/8 in. per foot
(10 mm per m) min.
*See Condensate Management Section for
additional information about optional piping.
2 ft. x 2 ft. (60 cm x 60 cm) Sheet
Metal Shield on Brick or Masonry
Walls
Installing the water heater
Optional
Condensate
Management
Drain Port*