Instructions / Assembly

38
Replacement Parts
For 40 and 50 gallon models equipped for use with Natural or Liquefied Petroleum / LP gas.
Instructions For Placing a Parts Order
All parts orders should include:
The model and serial number of the
water heater from the rating plate.
Specify type of gas (Natural or
Liquefied Petroleum / LP gas) as
marked on the rating plate.
Part description (as noted below) and
number of parts desired.
Refer to page 40.
CAUTION: For your safety, DO
NOT attempt repair of gas piping,
combination gas control (thermostat),
burners, vent system or other safety
devices. Refer repairs to qualified
service personnel.
Use only original equipment
replacement parts.
Blower
Assembly
Flue Baffle And Hanger
Anode Rod
** Heat Trap Nipple
Dip tube
Dip Tube Gasket
Drain Valve
(Appearance May Different)
Temperature and Pressure
Relief Valve
Combination
Gas Control
(Thermostat)
Pilot Assembly
*Burner Supply Tube
*Burner
Jacket Door
*Burner Access Door Grommet
*Sight Glass
*Burner Access Door
*Burner Access Door Gasket
*Burner orifice
*Burner Assembly Kit
The kit provides extra speed clips
and tamper resistant screws.
** May differ in actual appearance.
Flammable Vapor Sensor
Rubber Coupling
Combustion Gas
Control Thermal Well
*Combustion Shutoff Device (enlarged view)
Located inside the combustion chamber.