Specification
02/24 FORM NO. THD-PP-PIHP-SC-SO Rev. 4
Plug-in Heat Pump
with HydroBoost and
LeakGuard
™
(120V Shared Circuit)
40, 50, 65 and 80-Gallon
Capacities
120 Volt / 1 PH
Electric
Shared Circuit Design
PERFORMANCE PLATINUM
™
Plug-in
Heat Pump Water Heater with HydroBoost
and LeakGuard (120V Shared Circuit)
Efficiency
n Up to 3.46 UEF reduces operating
cost
n ENERGY STAR
®
certified
n Title 24 Compliant (JA13 Ready)
Performance
n Delivers hot water more efficiently
than most standard electric water
heaters
n Ambient operating range: 37-145°F
is widest in class, offering more days
of HP operation annually; designed to
meet Northern Climate Spec
(NEEA Tier 2)
2
n Integrated HydroBoost mixing valve
maximizes output performance
Easy Installation
n Easy access side connections
n Factory installed plug-in power
cord – plugs directly into a standard
wall outlet
n Easily replaces a standard gas
water heater
Integration
n Demand Response Ready –
Built-in EcoPort
™
(CTA-2045 Port)
allows easy connection to Utility
programs
n LED Screen with built-in water
sensor alert with audible alarm
1
n Integrated EcoNet
®
Wi-Fi- connected
2
technology and free mobile app
gives users control over water
heater, allowing for customizable
temperature, vacation settings,
scheduling, energy savings and
system monitoring at home or away
n Integrated leak detection and
prevention system with factory
installed auto water shut-off valve
limits leaks to no more than 20
ounces of water
1, 3
n LeakSense
™
Built-in Leak Detection
System detects any leak large or
small, internal or external
1, 4
Operation Modes
n Heat Pump
n Vacation/Away: 2-28 days (or placed
on hold indefinitely)
Plus…
n Premium grade anode rod extends
the life of the tank
n 3/4" NPT water inlet and outlet;
3/4" condensate drain connections
n Easy access, top mounted washable
air filter
n 2" Non-CFC foam insulation
n Enhanced flow brass drain valve
n Temperature and pressure relief valve
installed
n Design certified to NSF/ANSI 372
(Lead Content)
Warranty
n 10-Year limited tank and parts
warranty
See Residential Warranty Certificate for complete
information
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efficiency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efficiency performance criteria.
1
Available with select models.
2
Wi-Fi broadband internet
connection required.
3
Source: Rheem Leak-Sensing Data; testing
under a vacuum lock using 50-gallon tank, no expansion tank,
average tank pressure of 40 psi, assuming no additional faucets
are opened.
4
Water leaks from the heater only, as tested across
scenarios including a minimum of 5.5mL/hr volume leak rate,
using most common installation scenarios.
See specications chart on back.
LEED Points = 3
These products meet a stringent
set of our internally defined
sustainability standards.