Instructions / Assembly

15
Programming the Electronic Control
Setting the Water Temperature
Changing The Water Temperature
or
HOT-HOTTER
(120°F (49°C))
HOTTER-HOTTEST
(140°F (60°C))
UNLOCK / LOCK
(HOLD 3 SEC)



UNLOCK / LOCK
(HOLD 3 SEC)



UNLOCK / LOCK
(HOLD 3 SEC)



UNLOCK / LOCK
(HOLD 3 SEC)



UNLOCK / LOCK
(HOLD 3 SEC)



When power is applied, the water
heater will be in a Disabled mode.
This means that the water heater is
not heating the water and only the
power LED is illuminated. Press
the RIGHT arrow until the desired
temperature range is shown.
Reduce Water Temperature:
Press LEFT arrow until the
desired temperature is shown.
Increase Water Temperature:
Press RIGHT arrow until the
desired temperature is shown.
NOTE: Changes in temperature
occur in 10°F increments. See
page 14 for temperature set
points.
DANGER: Higher temperature
water increases the potential for Hot
Water SCALDS.
HOT
(110°F (43°C))