Submittal Sheet

UNIT DATA
COOLING PERFORMANCE
EFFICIENCY ................................
_______
SEER
TOTAL CAPACITY*..................
_______
MBH [kW]
SENSIBLE CAPACITY*............
_______
MBH [kW]
OUTDOOR DESIGN TEMP. ....
_______
°F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL............
_______
°F [°C] DB
_______
°F [°C] WB
POWER INPUT REQUIREMENT ........
_______
kW
(*uses blower motor heat)
HEATING PERFORMANCE
EFFICIENCY ................................
_______
HSPF
TOTAL CAPACITY*..................
_______
MBH [kW]
OUTDOOR DESIGN TEMP. ....
_______
°F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL............
_______
°F [°C] DB
SUPPLY AIR BLOWER PERFORMANCE
TOTAL AIR SUPPLY ................
_______
CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT......................................
_______
IWG
BLOWER SPEED ..........................
_______
RPM
POWER OUTPUT REQUIREMENT ..
_______
BHP
MOTOR RATING ........................
_______
HP [W]
POWER INPUT REQUIREMENT ........
_______
kW
ELECTRICAL DATA
POWER SUPPLY ......................
____________ Hz
TOTAL UNIT AMPACITY................
_______
AMPS
MINIMUM WIRE SIZE ....................
_______
AWG
MAXIMUM OVERCURRENT DEVICE
FUSES/HACR BREAKER ..........
_______
AMPS
CLEARANCES
ACCESS SIDE 24" [609.6 mm]
AIR INLETS 12" [304.8 mm]
ABOVE UNIT 60" [1524 mm]
JOB NAME LOCATION
CONTRACTOR ORDER NO.
ENGINEER UNIT MODEL NO.
SUBMITTED FOR APPROVAL RECORD COIL MODEL NO.
DATE AIR HANDLER MODEL NO.
SUBMITTAL SHEET FOR 15PJL SERIES
1
1
/2 TO 5 NOMINAL TON [5.28 TO 17.58 kW], 15 SEER
HEAT PUMP UNITS
FORM NO. X66-1298 REV. 1
Supersedes Form No. X66-1298
FEATURES FOR 15PJL SERIES HEAT PUMP UNITS
1
1
/2 TO 5 NOMINAL TON [5.28 TO 17.58 kW]
Featuring Industry
Standard R-410A
Refrigerant
(IN CERTAIN MATCHED SYSTEMS)
■ 35" Maximum Unit Height.
■ Coils constructed with copper tubing and enhanced aluminum fins.
■ Strong, attractive cabinet—louvered design protects the coil from
damage.
■ Expansion Valves with Internal Check Valve—Provides for quieter
refrigerant metering.
■ Enhanced Demand Defrost Control
■ Factory Installed Low Pressure Control
■ Non-Cycling Reversing Valve
■ Hot Gas Muffler
■ Service Valves
■ Grille/motor mount for quiet fan operation.
■ Easily accessible control box.
■ Bi-Directional Filter Drier (Field Installed)
■ Certified and rated under A.H.R.I. Standard 240.
■ U.L listed.
ACCESSORIES/OPTIONS
■ Optional High Pressure Control (Model No. RXAB-A07) ................
■ Heat Pump Thermostat Warning Light Kit
(Model No. RXPX-D01)
........................................................
■ Low Ambient Control (Model No. RXAD-A08)..............................
■ Outdoor Thermostats (Model No. RXPT-A01, A02, A03 or A04) ......
■ Heat Pump Monitor (Model No. RXPM-B01) ..............................
■ Thermostats and Subbases (Available through the
PROSTOCK
®
department)......................................................
■ Compressor Time Delay Control (Model No. RXMD-B01) ..............
■ Blower Time Delay Control (Model No. RXMD-C04) RXMD-C04 is
not required if the outdoor unit is matched with a furnace or air
handler from the Manufacturer, or if the furnace or air handler used
has a blower off time delay built-in.
..........................................
■ Sound Enclosure* ................................................................
■ Start Components* ..............................................................
*Available through the PROSTOCK
®
department.