Submittal Sheet

JOB NAME LOCATION
CONTRACTOR ORDER NO.
ENGINEER UNIT MODEL NO.
SUBMITTED FOR APPROVAL RECORD COIL MODEL NO.
DATE AIR HANDLER MODEL NO.
13A(-)N SERIES AIR CONDITIONER
EFFICIENCIES UP TO 14.5 SEER/12 EER
NOMINAL SIZES 1.5 TO 5 TONS [5.28 TO 17.6 kW]
FORM NO. X33-1407
Supersedes Form No. X66-1317 Rev. 1
Low Pressure Control....................................................
High Pressure Control ........................................................
Low Ambient Control..........................................................
Compressor Time Delay Control ........................................
Crankcase Heater ........................................................
Sound Enclosure ................................................................
ACCESSORIES
FEATURES FOR 13A(-)N SERIES
AIR CONDITIONERS
1.5 TO 5 NOMINAL TON [5.28 TO 17.6 kW]
■ Painted louvered steel cabinet
■ Easily accessible control box
■ Condenser coils constructed with copper tubing and enhanced
aluminum fins
■ Grille/Motor mount for quiet fan operation
■ Filter Drier (shipped – not installed)
16.0
“Proper sizing and installation of equipment is critical to achieve optimal performance.
Ask your Contractor for details or visit www.energystar.gov.”
UNIT DATA
COOLING PERFORMANCE
EFFICIENCY ..................................
_______
SEER
TOTAL CAPACITY*....................
_______
MBH [kW]
SENSIBLE CAPACITY*..............
_______
MBH [kW]
OUTDOOR DESIGN TEMP. ........
_______
°F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL ..............
_______
°F [°C] DB
_______
°F [°C] WB
POWER INPUT REQUIREMENT ..........
_______
kW
(*uses blower motor heat)
SUPPLY AIR BLOWER PERFORMANCE
TOTAL AIR SUPPLY ..................
_______
CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT........................................
_______
IWG
BLOWER SPEED..............................
_______
RPM
POWER OUTPUT REQUIREMENT ....
_______
BHP
MOTOR RATING ..........................
_______
HP [W]
POWER INPUT REQUIREMENT ..........
_______
kW
ELECTRICAL DATA
POWER SUPPLY ..........................
___________Hz
TOTAL UNIT AMPACITY..................
_______
AMPS
MINIMUM WIRE SIZE ......................
_______
AWG
MAXIMUM OVERCURRENT DEVICE
FUSES/HACR BREAKER ............
_______
AMPS
CLEARANCES
ACCESS SIDE 24" [609.6 mm]
AIR INLETS 6" [152.4 mm]
ABOVE UNIT 60" [1524 mm]