Specifications

INSTALLATION
32
ASSEMBLY DIAGRAM – RLX SERIES WITHOUT OTP – SCREWED FITTING COLLECTORS
Components
1. Collector Hot Return Pipe
2. HT55 TPR Valve 850 kPa
3. M33 T Hot Outlet
4. M33 Collector Nut
5. Collector Union
6. Retaining Clip
7. Collector connections – O-rings
Tank connections – Silicone
Rubber Washer
8. H50 ECV – 700 kPa
9. Brass Nipple **
10. Brass T **
11. Self Tap Screw 8 gge X ½”
12. Boiler Union **
13. Collector Angle
14. Collector and Tank Straps
15. Collector Flow Pipe
16. Combination Stop, Strainer
& Non-Return Valve **
17. PLV 500 kPa *
18. Tank Starter Pipe Assy
20. Boiler Tap
21. M33 To ½” BSP Reducing
Bush
22. Pressure Relief Valve
200 kPa
23. M33 To ¾” Cone Adaptor
24. Plastic End Cover (pr) ***
32. Copper Blanking Disk
36. Tank to Collector Spacer
* if required
** not supplied
*** optional
Note: Pressure Relief Valve 200 kPa (22) and Retaining Clip (6) are transported behind the electrical cover.
RLX32 without OTP - Exploded View
Screwed Fitting Collectors