Specifications

INSTALLATION
29
ASSEMBLY DIAGRAM – 52H SERIES WITHOUT OTP – CONETITE FITTING COLLECTORS
Components
1. Collector Hot Return Pipe
2. HT55 TPR Valve 850 kPa
3. M33 T Hot Outlet
4. Collector Gland Nut
5. Collector Union - conetite
6. Retaining Clip
7. Silicone Rubber Washer
8. H50 ECV – 700 kPa
9. Brass Nipple **
10. Brass T **
11. Collector Clamp and
Fasteners
12. Boiler Union **
13. Collector Rail
14. Tank Strap
15. Collector Flow Pipe
16. Combination Stop, Strainer
& Non-Return Valve **
17. PLV 500 kPa *
18. Tank Starter Pipe Assy
19. Collector Strap
20. Filling Plug Assembly
21. Collector Bung
22. Pressure Relief Valve
200 kPa
24. Plastic End Cover (pr) ***
36. Tank to Collector Spacer
37. Copper reducer DN25 x
DN20
* if required
** not supplied
*** optional
Note: Pressure Relief Valve 200 kPa (22) and Retaining Clip (6) are transported behind the electrical cover.
RLX32 without OTP - Exploded View
Conetite Fitting Collectors