Owner`s manual
Operating Manual
69-2306—01 6
Cleaning and maintenance
Warning: Scalding hazard.
Donotattempttoremovethehumidifierfromthemountingbracketduringoperation,or
thehumidifier’swatertankwhenfullofwater.Theheatingelementcouldbehotwhen
tank is removed. Failure to comply could result in severe scalding or death.
To clean:
1. PresstheEMPTYbutton.WaitfortheCLEANTANKlighttobeonsolid(notblinking).
Maintenance is made simple with the humidifier—just remove the water tank for cleaning.
EMPTY
M24774
CLEAN TANK
(BLINKING LIGHT)
M24775
M24776
CLEAN TANK
(ON SOLID)
Wait
(approximately 15 minutes)
Go to Step 2
Drain Operation
• Autoflushingisconfigurableto10,20or30hoursofoperationaltime(heatingelement
active).
• Duringautoflushing,coldwaterwillenterthetanktolowerwatertemperaturebelow140°F
(60°C) before draining.
• Duringmanualflush(performedbypressingtheEMPTYbutton)initialwatertemperature
may be above 140°F (60°C). Ensure drain outlet is not exposed and use caution when
pressingtheEMPTYbutton,anddoNOTattempttoremovethetankwithwaterinit.
• Manualflushtakesapproximately15minutestoemptythetankcompletely.
CAUTION
Hot water temperature above 140°F (60°C) can cause burns from scalding.










