Installation guide
Humidification System 
 25 69-2307—01
7.  Replace inline filter once per year. Turn water supply off before replacing.
Press down filter collar ring and pull 
out 1/4 in. water line from each side.
Insert 1/4 in. lines into new filter. Apply 
modest pressure to ensure a tight fit.
M27410
M27411
Onceclean,reattachtankbysecuringthelatch.Engagethewatervalvetothecamshaft,and
“Lock”theshut-offvalve.The“PressReset”lightwillblinkatstart-up.PushtheRESETbutton
to ready the humidifier.
Automatic End of Season Shutdown
Yourhumidifierhasthebuilt-inintelligencetoshutdownwhenhumidityisnotneededforan
extended period. After 48 hours of inactivity, the humidifier will drain and remain empty until 
humidity is needed again. This prevents water from stagnating within the tank. The tank will refill 
with water upon next humidity call.
There are a few house-cleaning steps to follow to keep your humidifier operating at peak effi-
ciency:
1.  Follow steps 1–6 in the Cleaning section on pages 23–24 at least once per year, or when the 
“PressEmpty”lightisblinking.
2.  Clear ventilation holes in the humidifier’s cover.
3.  Clear the water drain tube.
4.  Make sure the water tank gasket seal is not cracked or split before reattaching the humidifier 
water tank.
5.  Check that the humidifier is still mounted level.
Extended Vacation
When you leave on extended vacations, it is recommended you turn off the humidifier’s water 
supply and turn off the humidity control. When you return, turn on the humidifier water supply 
and reset your humidity control to a comfortable position.
CleanIng and seasonal oR VaCaTIon maInTenanCe CleanIng and seasonal oR VaCaTIon maInTenanCe










