Specification Sheet

ManualsBrandsRheem ManualsOther(RH1P)

Rheem Standard Efficiency Air Handler

FORM NO. H11-552

RH1P- Series

PSC Motor

Efficiencies up to 15 SEER

• Versatile 4-way convertible design for upflow, downflow,

horizontal left and horizontal right applications.

• Factory-installed indoor coil.

• Sturdy cabinet construction with 1.0 inch [25.4 mm] of

foil faced insulation for excellent sound and insulating

characteristics.

• Field-installed auxiliary electric heater kits provide exact heat

for indoor comfort. Kits include circuit breakers which meet

U.L. and cUL requirements for service disconnect.

•1

/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between

/2 to 55

/2 inches [1080 to 1410 mm] tall and 22 inches

[559 mm] deep.

• All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per

ton at .3 inches [.7 kPa] of external static pressure.

• Enhanced airflow up to .7" external static pressure.

• Evaporator is constructed of aluminum fins bonded to inter-

nally grooved aluminum tubing.

Air

Air Handlers

RH1P Series

Summary of content (20 pages)

PAGE 1
Air Air Handlers RH1P Series Rheem Standard Efficiency Air Handler RH1P- Series PSC Motor Efficiencies up to 15 SEER • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. • Factory-installed indoor coil. • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics. • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort.
PAGE 2
Air Table of Contents RH1P- Series TABLE OF CONTENTS Engineering Features ......................................................................................3 Model Number Identification ............................................................................4 Dimensional Data............................................................................................5 Airflow Directional Data ..................................................................................
PAGE 3
Air Engineering Features RH1P- Series Engineering Features • The most compact unit design available, all standard heat air handler models only 421/2 to 551/2 inches [1079 to 1409 mm] high. • Attractive pre-painted cabinet exterior. • Rugged wall steel cabinet construction, designed for added strength and versatility. • 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. • Four leg blower motor mount.
PAGE 4
R Air Model Number Identification RH1P- Series H 1 P 24 17 S T A N A A *** Option Code (see ADS-3803) Blank = None Minor Series A = First Voltage A = 115/1/60 D = 480V/3/60 J = 208/240/1/60 Controls C = Communicating N = Non-Communicating Major Series A = First Metering Device T = TEV E = EEV P = PISTON Coil Efficiency S = Standard M = Medium H = High Width 17 = 17.5" [431.8 mm] (600-1200 CFM) 21 = 21" [533.4 mm] (800-1600 CFM) 24 = 24.5" [609.
PAGE 5
Air Dimensional Data RH1P- Series Unit Dimensions SUPPLY AIR ELECTRICAL CONNECTIONS MAY EXIT TOP OR EITHER SIDE HIGH VOLTAGE CONNECTION 7/8 [22.2 mm], 13/32 [27.8 mm], 131/32 [50 mm] DIA. KNOCKOUTS. NOTE: 24 CLEARANCE REQUIRED IN FRONT OF UNIT FOR FILTER AND COIL MAINTENANCE. 105/16 [262 mm] W A LOW VOLTAGE CONNECTION 5/8 [15.9 mm] AND 7/8 [22.
PAGE 6
Air Airflow Directional Data RH1P- Series Airflow Directional Data UPFLOW HORIZONTAL LEFT HAND AIRFLOW 6 DOWNFLOW HORIZONTAL RIGHT HAND AIRFLOW
PAGE 7
Air Airflow Performance Data RH1P- Series Airflow Performance Airflow performance data is based on cooling performance with a coil and no filter in place. Select performance table for appropriate unit size, voltage and number of electric heaters to be used. Make sure external static applied to unit allows operation within the minimum and maximum limits shown in table below for both cooling and electric heat operation. For optimum blower performance, operate the unit in the .3 [8 mm] to .
PAGE 8
Air Airflow Performance Data RH1P- Series 115V/208V/480V Airflow Performance Data—RH1P- (PSC Motor) Model No.
PAGE 9
Air Airflow Performance Data RH1P- Series 115V/208V/480V Airflow Performance Data—RH1P- (PSC Motor) Model No.
PAGE 10
Air Airflow Performance Data RH1P- Series 240V Airflow Performance Data—RH1P- (PSC Motor) Model No.
PAGE 11
Air Airflow Performance Data RH1P- Series 240V Airflow Performance Data—RH1P- (PSC Motor) Model No.
PAGE 12
Air Electrical Data RH1P- Series Electrical Data – Blower Motor Only – No Electric Heat Model RH1P 1817ST 2417ST 3017ST 3617ST 4221ST 4821ST 1817ST 2417ST 3017ST 3617ST/3621ST 4221ST 4821ST/4824ST 6024ST 3617ST 4221ST 4821ST/4824ST 6024ST Voltage Application Phase* 115 1 60 208/240 1&3 60 208/240 3 60 480 3 60 480 3 60 * Blower motors are all single phase motors. [ ] Designates Metric Conversions 12 Hertz HP [W] RPM Speeds Circuit Amps.
PAGE 13
Air Electrical Data RH1P- Series Electrical Data – With Electric Heat Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH1P 1817ST/ 2417ST Heater Model No. No. Elements kW Per Type Supply Circuit Single Circuit Multiple Circuit Amps. Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protection RXBH-1724?03J 2.25/3.0 1/60 1 - 3.0 SINGLE 10.8/12.5 1.
PAGE 14
Air Electrical Data RH1P- Series Electrical Data – With Electric Heat (Cont.) Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH1P Heater Model No. RXBH-1724A18J RXBH-1724A07C 3621ST PH/HZ No. Elements kW Per Type Supply Circuit Single Circuit Multiple Circuit Amps. Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protection 4.3/5.7 1/60 1 - 5.
PAGE 15
Air Electrical Data RH1P- Series Electrical Data – With Electric Heat (Cont.) Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH1P 4221ST/ 4821ST/ 4824ST Heater Model No. Heater kW (208/240V) (480V) PH/HZ No. Elements kW Per Type Supply Circuit Single Circuit Multiple Circuit Amps.
PAGE 16
Electrical Wiring RH1P- Series Air Electrical Wiring Power Wiring Grounding • Field wiring must comply with the National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • This product must be sufficiently grounded in accordance with National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • Supply wiring must be 75°C minimum copper conductors only. • See electrical data for product Ampacity rating and Circuit Protector requirement.
PAGE 17
Air Limited Warranty RH1P- Series GENERAL TERMS OF LIMITED WARRANTY* Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable periods stated, in accordance with the terms of the limited warranty. Conditional Parts (Registration Required) ..........
PAGE 18
Air 18 Notes RH1P- Series
PAGE 19
Air Notes RH1P- Series 19
PAGE 20
The new degree of comfort.™ In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Heating, Cooling & Water Heating • P.O. Box 17010 Fort Smith, Arkansas 72917 • www.rheem.com Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1 Brampton, Ontario • L6Y 0P5 PRINTED IN U.S.A 3/14 QG FORM NO.