Specification Sheet

Air

Standard & Optional Equipment

R802V (UF/HZ) Series

WARNING

THIS FURNACE IS NOT APPROVED

OR RECOMMENDED

FOR USE IN MOBILE HOMES

DIRECT SPARK IGNITOR

IN-SHOT BURNERS

DRAFT INDUCER MOTOR

PATENTED HEAT EXCHANGER

INTEGRATED FURNACE

CONTROL

STANDARD EQUIPMENT

Completely assembled and wired; 2 speed induced draft blower; high

and low pressure switches; 2 stage redundant main gas control;

blower compartment door safety switch; solid state time on/time off

blower control; limit control; transformer; ECM blower motor. Furnaces

are equipped with cooling/heating relay and transformer (50VA) ready

for air conditioning applications. (Please note: a thermostat is not

included as standard equipment.) Flame sensor diagnostics; fused-

protection (secondary), 3rd speed option for continuous fan.

OPTIONAL EQUIPMENT

Side and bottom filter frame assembly. 4" Flue Adapter

NOTE: Furnace is not listed for use with fuels other than natural or L.P.

(propane) gas.

The complete terms of limited and other warranties are available at our

sales office, or through local installer.

All models can be converted by a qualified Rheem distributor or local

service dealer to use L.P. (propane) gas without changing burners.

Factory approved kits must be used to convert from natural to L.P.

(propane) gas and may be ordered as optional accessories from a

Rheem parts distributor.

For L.P. (propane) operation, refer to Conversion Kit Index Form.

NOTE: For natural and L.P. (propane) gas models, direct spark ignition

is 100% safety lockout type.

ECM MOTOR