Submittal Sheet

Before proceeding with installation, refer
to installation instructions packaged
with each model, as well as complying
with all Federal, State, Provincial, and
Local codes, regulations, and practices.
Rheem Sales Company, Inc.
P.O. Box 17010, Fort Smith, AR 72917
“In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.”
PRINTED IN U.S.A. 11-14 QG FORM NO. X33-1445
Supersedes Form No. X33-1209
Downflow Dimensions
Dimensions and Clearance to Combustible Material (inches) [mm]
MODEL
R802V-
SERIES
A B C D E
REDUCED CLEARANCES (IN.) [mm]
075317
17
1
/2 [445] 16
11
/32 [415] 12
1
/8 [308]
16
5
/8 [422]
0
3
0 1 [25] 3 [76]
6 [152]
LEFT
SIDE
RIGHT
SIDE
BACK TOP FRONT VENT
SHIP. WGTS.
(LBS.) [kg]
100 21
1
/2 [533] 19
27
/32 [504] 13
7
/8 [352]
20
1
/8 [511] 0 0 0 1 [25] 3 [76]
6 [152]
120 [54.4]
110 [49.9]
075421 21
1
/2 [533] 19
27
/32 [504] 13
7
/8 [352]
20
1
/8 [511] 0 0 0 1 [25] 3 [76]
6 [152]
115 [52.2]
125
24
1
/2 [622] 23
11
/32 [593] 15
5
/8 [397]
23
5
/8 [600]
0 0 0 1 [25] 3 [76]
6 [152]
140 [63.5]
NOTES: May require a 3" [76 mm] to 4" [102 mm] or 3" [76 mm] to 5" [127 mm] adapter.
May be 0" [0 mm] with type B vent.
May be 1" [25 mm] with type B vent.
Furnaces must be vented in accordance with the National Fuel Gas Code, ANSI Z223.1 and/or Can/CGA-B149 Installation Codes and in accordance with
local codes.
[ ] Designates Metric Conversions