Technical data

INSTALLATION

Feet for Rheem Externally Mounted Cylinders

Optima 180, 300 and 400L Mains Pressure Water Heaters (3 pieces)

Outside diameters

180 model – 488mm

300 model – 580mm

400 model – 690mm

Feet are 50mm in from edge of cyli

nder

Installation options:

1. Push tags into soft concrete at correct points according to cylinder diameter

2. Cut off tags and use a blob of construction adhesive to hold feet in place at

correct points according to cylinder diameter

3. Cut off tags and screw feet into place on wooden platform at correct points

according to cylinder diameter

Note: It is important that only three feet are used to avoid “rocking” and that the

feet are positioned at 50mm from outside edge of cylinder to outside edge of feet.

317952A-01