Technical data

HEAT PUMP AND TANK ASSEMBLY

25. Positioning of Water Heater: Complete final positioning of the water

heater.

Ensure the heat pump module is firmly seated on the level slab or solid

base.

26. Water Connections: Connect the cold water supply and the hot water

pipe work to the water heater.

 Connect the temperature pressure relief valve and its drain line.

Refer to “Connections – Plumbing” in the Owner‟s Guide and

Installation Instructions supplied with the storage tank.

27. Water Supply: Turn on the cold water supply and fill the water heater.

 Check the pipe work and the connection points for the flexible braided

hoses for leaks

Refer to “To Fill And Turn On The Water Heater” on page 28,

however the electrical supply should not be turned on at this stage.

28. Heat Pump Module Cover: Replace the heat pump module cover and re-

fit the two screws.

Step 28

replace heat pump module front cover

29. Commissioning: Refer to “Commissioning” in the Owner‟s Guide and

Installation Instructions supplied with the storage tank.