Manualshelf

Technical data

ManualsBrandsRheem ManualsHome building and DecorMPi 551 Series
21222324252627282930
HEAT PUMP AND TANK ASSEMBLY
23
19. Position Heat Pump Module: Position the heat pump module against the
tank.
Engage the tab at the bottom of the heat pump module, on the wall
side of the module, into the slot in the tank.
Align the holes in the side of the heat pump module over the three
studs.
20. Flange Nuts: Screw the three flange nuts onto the studs to connect the
wall side of the heat pump module to the storage tank.
Steps 19 and 20
align heat pump module over studs and screw on flange nuts
21. Tab: Engage the tab at the bottom of the heat pump module, on the front
side of the module, into the slot in the tank.
22. Fixing Bolts: Screw in the three fixing bolts to connect the front side of
the heat pump module to the storage tank.
Step 22
screw in fixing bolts to connect heat pump module to storage tank