Technical data

HEAT PUMP AND TANK ASSEMBLY
22
17. Cable Tab: Remove the tab on the side of the electrical entry to the heat
pump module to accommodate the electrical conduit.
Pliers or tin snips may be required to remove the tab.
Step 17
remove the tab on the side of the electrical entry to the heat pump module
18. Studs: Retrieve the three (3) studs from the kit and screw into the
three (3) threaded inserts on the side of the tank closest to the wall.
These studs will assist in aligning the heat pump module for connection to
the storage tank.
Step 18
screw in studs into threaded inserts