Technical data

HEAT PUMP AND TANK ASSEMBLY
21
15. Hot Hose Connection: Attach the flexible braided hose, marked with a
red collar, from the top of the circulator to the fitting in the top connection
on the storage tank and marked “OUTLET” in red.
 Tighten the swivel nut on the hose using a 24 mm spanner.
Tape or sealant is not required.
 Position the hose such that when the heat pump module is moved
and secured to the tank, it does not kink.
Step 15
attach flexible hose with red collar to outlet
16. Check Hoses: Check to ensure the flexible hoses are not kinked.