Specification Sheet

4
Air & Water
Model Features & Model Number Identification
RHWB Series
Features of the Hydronic Air Handler
• Low profile 34-inch design is lighter, easier to handle
and leaves room for optional accessories
• Left or right side electric connections
• Integrated control board features diagnostics, manages
all operational functions and provides hookups for
humidifier and electronic air cleaner
• An insulated blower compartment makes it one of the
quietest hydronic air handlers on the market today
• Pre-paint galvanized steel cabinet
• Molded permanent filter(s)
• Transformer and control fuse protection
• Solid bottom is standard
• A variety of cooling coils and plenums designed to use
with the Hydronic Air Handler are available as optional
accessories for air conditioning models
• Stainless steel water pump
Model Features
Features of the Tankless Water Heater
• Industry best! Minimum flow rate of .26 GPM,
minimum activation flow rate of .40 GPM
• ENERGY STAR
®
rated models available
• Next generation burner technology
• UMC-117 remote control and 10 ft. of thermostat wire
is included
• EZ-Link™ cable available for high demand applications
to connect two tankless units to operate as one
• High-altitude capability – up to 9,840 ft. elevation
above sea level (no chip required)
• Intelligent electronic controls designed to increase
energy efficiency and safety
• Self Diagnostic System
R H W B -06W M P 36 B
Brand Application Type
Design
Series
Heating Output Designation
Blower
Size
Variations
Heat/Cool
Designation
Revision
Inlet Water
Temp = 150F [66°C]
Output
BTU/HR [kW]
R = Rheem H = Air Handler W = Water
B =
2nd Series
04W 40,000 [11.7 kW]
M = 11x7
[279 x 178 mm]
R = 11x10
[279 x 254 mm]
P = PSC
X = Eco
Tech™
(ECM)
36 = 1100-1300 CFM
[519-613.5 L/s]
48 = 1500-1700 CFM
[707.9-802.3 L/s]
60 = 1900-2100 CFM
[896
.7-991.1 L/s]
B = Rev 1
06W 60,000 [17.6 kW]
08W 80,000 [23.5 kW]
10W 90,000 [28.3 kW]
[ ] Designates Metric Conversions
Hydronic Air Handler Model Identification