Specification Sheet

ManualsBrandsRheem ManualsAir Care ProductRheem High Efficiency - Up to 16 SEER ECM Motor

Rheem High Efficiency Air Handler

FORM NO. H11-554

RH1V/RH2V- Series

ECM Motor

Efficiencies up to 16 SEER

• Includes an energy efficient ECM

Motor, which in most appli-

cations, enhances the SEER rating of the outdoor unit. It also

slowly ramps its speed up for quiet operation and enhanced

customer satisfaction.

• Versatile 4-way convertible design for upflow, downflow,

horizontal left and horizontal right applications.

• Nominal airflow up to 1.0" external static pressure.

• Factory-installed indoor coil.

• Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced

insulation for excellent sound and insulating characteristics.

• Field-installed auxiliary electric heater kits provide exact heat

for indoor comfort. Kits include circuit breakers which meet

U.L. and cUL requirements for service disconnect.

• Dip switch settings for selectable, customized cooling airflow

over a wide variety of applications.

• On-demand dehumidification terminal that adjusts airflow to

help control humidity for unsurpassed comfort in cooling mode.

• External filter required.

• Evaporator coil is constructed of aluminum fins bonded to

internally grooved aluminum tubing.

Air

Air Handlers

RH1V/RH2V Series

Summary of content (20 pages)

PAGE 1
Air Air Handlers RH1V/RH2V Series Rheem High Efficiency Air Handler RH1V/RH2V- Series ECM Motor Efficiencies up to 16 SEER • Includes an energy efficient ECM® Motor, which in most applications, enhances the SEER rating of the outdoor unit. It also slowly ramps its speed up for quiet operation and enhanced customer satisfaction. • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. • Nominal airflow up to 1.0" external static pressure.
PAGE 2
Air Table of Contents RH1V/RH2V Series TABLE OF CONTENTS Engineering Features ......................................................................................3 Model Number Identification ............................................................................4 Dimensional Data ........................................................................................5-6 Airflow Directional Data ..................................................................................
PAGE 3
Air Engineering Features RH1V/RH2V Series Engineering Features RH1V/RH2V- Series • Quiet, efficient ECM motor technology providing nominal airflow up to 1.0 inch [25 kPa] of external static pressure. • Interface board with dip switches conveniently located in the blower compartment allows for precise, field selectable airflow to meet the requirements of particular applications. • Selectable continuous fan “on” options. • The most compact unit design available. • Attractive pre-painted cabinet exterior.
PAGE 4
(-) Air Model Number Identification RH1V/RH2V Series H 1 V 24 17 S T A N A A *** Option Code (see ADS-3803) Blank = None Minor Series A = First Voltage A = 115/1/60 D = 480/3/60 J = 208/240/1/60 T = 220/240/1/50 Controls C = Communicating N = Non-Communicating Major Series A = First Metering Device T = TEV E = EEV P = Piston Coil Efficiency S = Standard M = Medium H = High Width 17 = 17.5" [431.8 mm] (600-1200 CFM) 21 = 21" [533.4 mm] (800-1600 CFM) 24 = 24.5" [609.
PAGE 5
Dimensional Data RH1V/RH2V Series Air Unit Dimensions ELECTRICAL CONNECTIONS MAY EXIT TOP OR EITHER SIDE HIGH VOLTAGE CONNECTION 7/8 [22.2 mm], 13/32 [27.8 mm], 131/32 [50 mm] DIA. KNOCKOUTS. SUPPLY AIR NOTE: 24 CLEARANCE REQUIRED IN FRONT OF UNIT FOR FILTER AND COIL MAINTENANCE. 105/16 [262 mm] W A LOW VOLTAGE CONNECTION 5/8 [15.9 mm] AND 7/8 [22.
PAGE 6
Dimensional Data RH1V/RH2V Series Air Unit Dimensions & Weights Refrigerant Connections Sweat (In.) [mm] ID Model Size RH1V Liquid Unit Dimensions & Weights Vapor Unit Width “W” In. [mm] Unit Height “H” In. [mm] Supply Duct “A” In. [mm] Air Flow CFM (Nom.) [L/s] Lo Unit Weight/Shipping Weight (Lbs.) [kg] Unit With Coil (Max. KW) Hi 2417ST 3/8 [9.53] 3/4 [19.05] 171/2 [445] 421/2 [1080] 161/2 [406] 600 [283] 800 [378] 82/96 [37/44] 3617ST 3/8 [9.53] 3/4 [19.
PAGE 7
Air Airflow Directional Data RH1V/RH2V Series Airflow Directional Data UPFLOW HORIZONTAL LEFT HAND AIRFLOW DOWNFLOW HORIZONTAL RIGHT HAND AIRFLOW 7
PAGE 8
Air Airflow Performance Data RH1V/RH2V Series Airflow Performance Airflow performance data is based on cooling performance with a coil and no filter in place. Select performance table for appropriate unit size, voltage and number of electric heaters to be used. Make sure external static applied to unit allows operation within the minimum and maximum limits shown in table below for both cooling and electric heat operation. For optimum blower performance, operate the unit in the .3 [8 mm] to .
PAGE 9
Air Airflow Performance Data RH1V/RH2V Series Airflow Performance and Electrical Data (Cont.) RH1V ECM CFM Air Delivery/RPM/Watts—230 Volts External Static Pressure—Inches W.C. [kPa] 0.1 [.02] 0.2 [.05] 0.3 [.07] 0.4 [.10] 0.5 [.12] 0.6 [.15] 0.7 [.17] 0.8 [.20] 0.9 [.22] 1.0 [.24] Motor Blower Model Nominal Size/ Tonnage Speed No.
PAGE 10
Air Electrical Data RH1V/RH2V Series Electrical Data – With Electric Heat RH1V Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH1V 2417ST Heater Model No. No. Elements kW Per Type Supply Circuit Single Circuit Multiple Circuit Amps. Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protector RXBH-1724?03J 2.25/3.0 1/60 1-3.0 SINGLE 10.8/12.5 2.
PAGE 11
Air Electrical Data RH1V/RH2V Series Electrical Data – With Electric Heat RH1V (Cont.) Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH1V 3821MT 4821ST Heater Model No. PH/HZ No. Elements kW Per Type Supply Circuit Single Circuit Multiple Circuit Amps. Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protector RXBH-1724A07C 5.4/7.2 3/60 3-2.
PAGE 12
Air Airflow Performance Data RH1V/RH2V Series Airflow Performance Airflow performance data is based on cooling performance with a coil and no filter in place. Select performance table for appropriate unit size, voltage and number of electric heaters to be used. Make sure external static applied to unit allows operation within the minimum and maximum limits shown in table below for both cooling and electric heat operation. For optimum blower performance, operate the unit in the .3 [8 mm] to .
PAGE 13
Air Electrical Data RH1V/RH2V Series Electrical Data (-)H2V Model RH2V HP [W] Voltage Phase Hertz RPM Circuit Amps. Minimum Circuit Ampacity Maximum Circuit Protector 2421HT 3624HT 1/3 [249] 3/4 [559] 208/230 208/230 1 1 60 60 300-1100 300-1100 1.7 4.9 4.0 9.0 15 15 4824HT 6024HT 3/4 [559] 3/4 [559] 208/230 208/230 1 1 60 60 300-1100 300-1100 4.9 4.9 9.0 9.0 15 15 Electrical Data – With Electric Heat RH2V Installation of the U.L.
PAGE 14
Air Electrical Data RH1V/RH2V Series Electrical Data – With Electric Heat RH2V (con’t.) Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH2V Heater Model No. PH/HZ No. Elements kW Per Type Supply Circuit Single Circuit Multiple Circuit Amps. Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protection RXBH-1724?07J 5.4/7.2 1/60 2 - 3.6 SINGLE 26.
PAGE 15
Air Electrical Wiring RH1V/RH2V Series Electrical Wiring Power Wiring Grounding • Field wiring must comply with the National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • This product must be sufficiently grounded in accordance with National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • Supply wiring must be 75°C minimum copper conductors only. • See electrical data for product Ampacity rating and Circuit Protector requirement.
PAGE 16
Air Limited Warranty RH1V/RH2V Series GENERAL TERMS OF LIMITED WARRANTY* Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable periods stated, in accordance with the terms of the limited warranty. 16 Conditional Parts (Registration Required) ..........
PAGE 17
Air Notes RH1V/RH2V Series 17
PAGE 18
Air 18 Notes RH1V/RH2V Series
PAGE 19
Air Notes RH1V/RH2V Series 19
PAGE 20
The new degree of comfort.™ In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Heating, Cooling & Water Heating • P.O. Box 17010 Fort Smith, Arkansas 72917 • www.rheem.com Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1 Brampton, Ontario • L6Y 0P5 PRINTED IN U.S.A 4/14 QG FORM NO.