Specification Sheet

ManualsBrandsRheem ManualsAir Care ProductRheem Front or Bottom Return - Slab Coil with PSC Motor

FORM NO. H11-533 REV. 1

Supersedes Form No. H11-533

AIR HANDLERS

RHBL- High Efficiency X-13 (ECM)

featuring Industry Standard

R-410A Refrigerant

RHAL- Standard Efficiency – PSC

featuring Industry Standard

R-410A Refrigerant

Features/Accessories

■

Front or Bottom Return

■

Flow Check Piston for cooling or heat pump operation

■

Wall-hanging brackets

■

Built in Filter Rack

■

Suitable for R-410A or R-22 Refrigerants (RHAL Only)

■

AHRI Certified

■

UL Certified

■

Molex Plug Connections for field installed heater kits

■

Dual Voltage Direct Drive Blower with multi-speed motor

■

Thermoplastic Drain Pan with bottom primary and

secondary connections

■

Optional Decorative Grill for front return applications

■

Optional Factory Installed Condensate Float Switch which

shuts off the outdoor unit in event the condensate pan

becomes clogged

Summary of content (12 pages)

PAGE 1
FORM NO. H11-533 REV. 1 Supersedes Form No.
PAGE 2
Engineering Features RHAL/RHBL- Series ■ The most compact unit design available, all standard heat air handler models only 36" [915 mm]. ■ Rugged wall steel cabinet construction, designed for added strength and versatility. ■ 1.0" foil faced insulation for excellent thermal and sound performance. ■ Four leg blower motor mount. ■ Traditional open wire element design for heat applications. ■ Indoor coil design provides low air side pressure drop, high performance and extremely compact size.
PAGE 3
Model Identification R H A L — FR 24 P J N 00 A 000 Options 417 = Float Switch Available Models at J Voltage Design Variation RHAL-FR18PJ Electric Heat 00 = NO HEAT 03 = 3 kW 05 = 5 kW 08 = 8 kW 10 = 10 kW RHAL-FR24PJ RHAL-FR30PJ RHAL-FR36PJ RHAL-FR36TJ RHBL-FR24TJ Disconnect Configuration N = None B = Breaker RHBL-FR36TJ • Supply circuit protective devices may be fuses or “HACR” type circuit breakers. • Largest motor load is included in single circuit.
PAGE 4
Unit Dimensions Unit Dimensions & Weights Dimensional Data Model (A) Unit Width In. [mm] (B) Unit Height In. [mm] (C) Unit Depth In. [mm] (D) Return Air Opening Width In. [mm] RHAL-18 RHAL-24 RHAL-30 RHAL-36 RHBL-24 RHBL-36 211/2 [546.1] 211/2 [546.1] 241/2 [609.6] 241/2 [609.6] 211/2 [546.1] 241/2 [609.6] 36 [914.4] 36 [914.4] 36 [914.4] 36 [914.4] 36 [914.4] 36 [914.4] 17 [431.8] 17 [431.8] 21 [533.4] 21 [533.4] 17 [431.8] 21 [533.4] 20 [508] 20 [508] 23 [584.2] 23 [584.2] 20 [508] 23 [584.
PAGE 5
Unit Dimensions 11/2 & 2 TON [5.28 & 7.03 kW] MODELS 21/2 & 3 TON [8.79 & 10.
PAGE 6
Airflow Performance Airflow performance data is based on cooling performance with a coil and filter in place. Select performance table for appropriate unit size, voltage and number of electric heaters to be used. Make sure external static applied to unit allows operation within the minimum and maximum limits shown in table below for both cooling and electric heat operation. For optimum blower performance, operate the unit in the .3 [8 mm] to .7 inches [18 mm] W.C. external static range.
PAGE 7
208V/240V Airflow Performance Data—RHAL (PSC Motor) Nominal Cooling Capacity Tons 1.5 2 2.
PAGE 8
208V/240V Airflow Performance Data—RHBL (X-13 (ECM) Motor) Nominal Cooling Capacity Tons 1.5 2 2.
PAGE 9
Piston Sizing Chart Indoor Unit Factory Piston RHAL-FR18PJ 0.047 RHAL-FR24PJ 0.053 RHAL-FR30PJ 0.061 RHAL-FR36PJ 0.065 SEER Rating OD Unit Nominal Tons Refrigerant Orifice Size 13 1.5 R410a 0.047 14 13 12 10 13 14 13 12 10 13 14 13 12 10 13 14 13 12 10 1.5 1.5 1.5 1.5 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 R410a R22 R22 R22 R410a R410a R22 R22 R22 R410a R410a R22 R22 R22 R410a R410a R22 R22 R22 0.049 0.049 0.051 0.053 0.053 0.057 0.057 0.061 0.063 0.061 0.063 0.065 0.065 0.065 0.065 0.
PAGE 10
RHAL/RHBL Electrical Data – Blower Motor Only – No Electric Heat 1.5 Minimum Circuit Ampacity 3 Maximum Circuit Protector 15 1.5 2.5 3 4 15 15 2 2.5 4 15 4 4 1.6 2.7 3 4 15 15 Model/Nominal Cooling Tons Voltage Phase Hertz HP [W] RPM Speeds Circuit Amps.
PAGE 11
16.0 Accessories-Kits-Parts • Drain Pan Over Flow Switch RXHK-A01 is used to detect condensate drain blockage and will shut down the outdoor unit in order to prevent structural damage to the surrounding structures of the air handler. • Bottom Return Conversion Kit RXHK- is used to divert the return air from the factory standard front return to a bottom return.
PAGE 12
Before proceeding with installation, refer to installation instructions packaged with each model, as well as complying with all Federal, State, Provincial, and Local codes, regulations, and practices. Rheem Heating, Cooling and Water Heating P.O. Box 17010, Fort Smith, AR 72917 “In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.” PRINTED IN U.S.A. 7-10 DC FORM NO. H11-533 REV. 1 Supersedes F o r m N o .