Specification

PRINTED IN U.S.A. 06/17 WP FORM NO. RR102CE-2 Rev. 16
4
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Water
INTEGRATED HOME COMFORT
Commercial Electric
Booster Water Heaters
INTEGRATED AIR & WATER
INTEGRATED HOME COMFORT
Recommended Specifications
Water heater(s) shall be model ____________________,
manufactured by Rheem, having electrical input of
__________ kW and a recovery rate of _____________ GPH
at a 100°F temperature rise. Water heater(s) shall have a
storage capacity of 10 gallons. Water heater(s) shall have
the UL seal of certification and be factory equipped with
an CSA/ASME rated temperature and pressure relief valve.
Tank(s) shall have a unique coating of high temperature
porcelain enamel and furnished with magnesium anode rods
rigidly supported. Water heater(s) shall meet or exceed the
efficiency requirements of ASHRAE. Tank(s) shall have a
working pressure rating of 150 psi, and shall be completely
assembled. Water heater(s) shall be approve-listed and
constructed in accordance with UL Sanitation (NSF5). Water
heater(s) shall be equipped with “screw-in” type elements.
Water heater(s) shall be constructed with a SYSTEM
SENTINEL element diagnostic panel utilizing light emitting
diodes. Each LED will correspond to the number and location
of the heating elements and monitor their on-off function.
Water heater(s) shall be provided with internal power circuit
fusing, control circuit fusing, magnetic contactors, 120 volt
control circuit transformer and immersion thermostat(s) with
manual reset high limit control. 1-1/4" inlet and outlet water
connections shall be provided. Water heater(s) shall be
covered by a three year limited warranty against tank leaks.
Rheem Water Heating • 1115 Northmeadow Parkway, Suite 100
Roswell, Georgia 30076 • www.rheem.com
Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1
Brampton, Ontario L6Y 0P5 • www.rheem.com