Specification Sheet

Air

Standard & Optional Equipment

R92P Series

STANDARD EQUIPMENT

Completely assembled and wired; blocked drain sensor, 7

segment LED and marked hoses; heat exchanger; primary:

aluminized steel, secondary: 29-4C stainless steel; induced

draft; pressure switches; redundant main gas control; blower

compartment door safety switch; solid state time on/off

blower control; limit controls; manual shut-off valve; 100%

safety lock out; cool fan off delay; field selectable heat fan off

delay; one hour automatic retry; power and self-test diagnos-

tics; flame sense current diagnostics; electronic air cleaner

connections; twinning (built-in) features; humidifier connec-

tions; humidifier on/off delay; low speed continuous fan option;

single speed option for heating and cooling applications;

transformer; direct drive, multi-speed blower motor. (Please

note: a thermostat is not included as standard equipment.)

OPTIONAL EQUIPMENT

Side and bottom filter racks; return air cabinet for all sizes.

NOTE: Furnace is not listed for use with fuels other than natural

or L.P. (propane) gas.

All models can be converted by a qualified distributor or local

service dealer to use L.P. (propane) gas without changing burn-

ers. Factory approved kits must be used to convert from

natural to L.P. (propane) gas and may be ordered as optional

accessories from a parts distributor.

For L.P. (propane) operation, refer to Conversion Kit Index Form.

WARNING

THIS FURNACE IS NOT APPROVED

OR RECOMMENDED

FOR USE IN MOBILE HOMES

PRIMARY AND SECONDARY

HEAT EXCHANGER

IN-SHOT BURNERS

PRESSURE SWITCHES

DRAFT

INDUCER

CONTROL

BOARD

GAS VALVE AND MANIFOLD

DIRECT SPARK IGNITION &

REMOTE SENSOR

REMOTE

SENSOR

BLOCKED DRAIN

SENSOR