Submittal Sheet

“In keeping with its policy of continuous progress and product improvement, Manufacturer reserves the right to make changes without notice.”
PRINTED IN U.S.A. 6-13 QG FORM NO. X33-1429
Supersedes Form No. X33-1285 Rev. 2
Before proceeding with installation, refer
to installation instructions packaged
with each model, as well as complying
with all Federal, State, Provincial, and
Local codes, regulations, and practices.
MODEL
R96P
LEFT
SIDE
MINIMUM CLEARANCE (IN.) [mm]
SHIP WGTS.
(LBS.) [kg]
FLANGE DIMENSIONS
RIGHT
SIDE
BACK TOP FRONT VENT A B C
060 0 0 0 1 [25] 2 [51] 0
128 [58]
17
1
/2 [445] 16
17
/64 [413] 16
13
/64 [412]
070 0 0 0 1 [25] 2 [51] 0
132 [60]
17
1
/2 [445] 16
17
/64 [413] 16
13
/64 [412]
085 0 0 0 1 [25] 2 [51] 0
147.5 [67]
21 [533] 19
49
/64 [502] 19
45
/64 [500]
100 0 0 0 1 [25] 2 [51] 0
152 [69]
21 [533] 19
49
/64 [502] 19
45
/64 [500]
UNIT DIMENSIONS (CLEARANCE TO COMBUSTIBLES)
*A service clearance of at least 24" is recommended in front of all furnaces [ ] Designates Metric Conversions
Supply and return depicted as upflow configuration.
Flange configuration will vary depending on installation orientation.