Operating instructions

TEMPERATURE CONTROL – DELUXE
24
Bath Fill Mode – Explanatory Notes
To operate the Bath Fill mode:
1. Turn off all Deluxe controllers
 It is advised to turn off all Deluxe controller(s) before
activating the Bath Fill mode.
Refer to the notes on the Bathroom Deluxe
controllers on page 20.
The Deluxe controllers do not need to be on to set
the bath fill temperature and bath fill water volume
and to turn on the Bath Fill mode.
2. Pull down the front panel on the Deluxe controller.
The BATH FILL VOLUME and BATH FILL
TEMPERATURE up (i) and down (j) buttons will be
exposed.
3. Set the bath fill temperature
 Press the BATH FILL TEMPERATURE
i (up button) or the BATH FILL TEMPERATURE
j (down button).
The first press of either the BATH FILL
TEMPERATURE i (up button) or the BATH FILL
TEMPERATURE j(down button) will bring up the
last selected bath fill temperature setting.
While the bath fill temperature is displayed, each
subsequent press of the BATH FILL
TEMPERATURE i (up button) or BATH FILL
TEMPERATURE j (down button) will change the
temperature setting.
Refer to “Temperature Adjustment – Deluxe
Controllers” on page 17.
When the BATH FILL TEMPERATURE
i (up button) is pressed and the temperature
setting is increased, the voice prompt will sound;
“hot water temperature has been increased”
When the BATH FILL TEMPERATURE j(down button) is pressed and the temperature setting is
decreased, the voice prompt will sound;
“hot water temperature has been decreased”
The selected temperature setting will be displayed in the temperature display panel and will be
displayed on all Deluxe controllers.
The temperature display panel will go blank 3 seconds after the last press of either of the bath fill
temperature adjustment buttons.
The bath fill temperature setting will be remembered when the BATH FILL button is pressed “on”.
Rheem
BATH (l)
4
0

°C
120
ACTIVE
ON/OFFBATHFILL
B1
BATHFILL
VOLUME
BATHFILL
TEMPERATURE
ACTIVE
Lighton
2.
Adjust
Temperature
3.
Openhot
tap
4.HotWater
Press
1.
ON
/
OF
F
Bath
Water
Volume
Bath
Fill
Temp
BathFill
SetBathFill WaterVolume
andTemperature
1. 2.
BathFill
completed
(automatic)
BathFillButton
(Redlightflashes)
6.Closehottap 
5.
PressBath
FillButton 
(Redlighton)
3.
4. Openhottap
BATHFILL
PressBath
FillButton
(R edlightoff)
7.
BATHFILL
Rheem
BATH (l)
4
0

°C
120
ACTIVE
ON/OFFBATHFILL
B1
BATHFILL
VOLUME
BATHFILL
TEMPERATURE
ACTIVE
Lighton
2.
Adjust
Temperature 
3.
Openhot
tap
4.HotWater
Press
1.
ON
/
OFF
Bath
Water
Volume
Bath
Fill
Temp
BathFill
SetBathFillWaterVolume
andTemperature 
1. 2.
BathFill 
completed
(automatic)
BathFillButton
(Redlightfla shes)
6.Closehotta p
5.
PressBath
Fil lButto n
(Redlighton)
3.
4. Openhottap
BATHFILL
PressBath
FillButton
(R edlightoff)
7.
BATHFILL
“hot water
temperature
has been
increased”
or
“hot water
temperature
has been
decreased”