Operating instructions

TEMPERATURE CONTROL – DELUXE

TEMPERATURE ADJUSTMENT – DELUXE CONTROLLERS

• A controller must be on with the ACTIVE indicator displayed to be able to adjust the temperature setting.

• The temperature adjustment is made by pressing the up (i) button or down (j) button.

• The minimum temperature setting for each type of controller is 37°C.

• The maximum temperature setting for the controllers are:

Kitchen Bathroom

884 series 60°C – AU, 55°C – NZ 50°C

886 series 50°C 50°C

• Each press of the up (i) button will increase the temperature setting by one increment.

• Pressing and holding the up (i) button will scroll the temperature setting up to a maximum 43°C if there

is hot water flowing or 45°C if there is no hot water flowing.

• From the 45°C setting, the up (i) button must be pressed once for each increase in temperature

increment.

• The temperature setting cannot be increased above 43°C whilst hot water is flowing.

• Each press of the down (j) button will decrease the temperature setting by one temperature increment.

• Pressing and holding the down (j) button will scroll down the temperature setting.

• The temperature setting can be decreased from any temperature setting whether the hot water is flowing

or not.

Note: A Deluxe controller sounds a double beep at the 42°C temperature setting, if the voice prompt is not

speaking, when either the up (i) button or down (j) button has been pressed. The double beep does not

sound at the 42°C temperature setting when the BATH FILL TEMPERATURE i (up button) or BATH FILL

TEMPERATURE j(down button) is pressed.