Operating instructions

TEMPERATURE CONTROL – DELUXE
13
bath fill water volume display panel – The selected bath fill water volume is displayed in litres on all Deluxe
controllers.
The selected bath fill water volume is displayed whenever the Bath Fill mode is on
(refer to “Bath Fill Mode” on page 22) or when the bath fill water volume is being
adjusted and the Bath Fill mode is off.
If the bath fill water volume is being adjusted and the Bath Fill mode is off, then the
bath fill water volume display panel goes blank three (3) seconds after a BATH FILL
VOLUME button is last pressed.
At other times, if the Bath Fill mode is off, the bath fill water volume display panel
remains blank.
bath fill indicator light – this light in the display panel will glow when the bath fill water volume is displayed.
BATH FILL TEMPERATURE i (up button) – The up button increases the bath fill water temperature setting
(refer to “Temperature Adjustment – Deluxe Controllers” on page 17 and to “Bath Fill
Mode” on page 22).
BATH FILL TEMPERATURE j (down button) – The down button decreases the bath fill water temperature
setting (refer to “Temperature Adjustment – Deluxe Controllers” on page 17 and to
“Bath Fill Mode” on page 22).
BATH FILL VOLUME i (up button) – The up button increases the bath fill water volume setting in
increments of 10 litres up to 500 litres. A further setting of 990 litres can be selected.
BATH FILL VOLUME j (down button) – The down button decreases the bath fill water volume setting from
990 litres to 500 litres and in increments of 10 litres from 500 litres down to 10 litres.
DELUXE CONTROLLER
Rheem
BATH
(
l
)
42
°C
230
A
CTIVE
BATH FILL ON/OFF
K
BATH FILL
VOLUME
BATH FILL
TEMPERATURE
ACTIVE
Light on
2.
Adjust
Temperature
3.
Open hot
tap
4.Hot Water
Press
1.
ON/OFF
Bath Fill
completed
(automatic)
Bath Fill Button
(Red light flashes)
6. Close hot tap
5.
Press Bath
Fill Button
(Red light on)
3.
4. Open hot tap
BATH FILL
Press Bath
Fill Button
(red light off)
7.
BATH FILL
Bath Fill
Bath
Water
Volume
Bath
Fill
Temp
Set Bath Fill Water Volume
and Temperature
1. 2.
BATH FILL
VOLUME
j down button
BATH FILL
VOLUME
i up button
BATH FILL
button
assistance call
button
BATH FILL
operating light
Deluxe controller type
K = Kitchen
B1 = Bathroom1
B2 = Bathroom2
brief Deluxe controller
operating instructions
bath-fill mode and
hot water mode
BATH FILL
TEMPERATURE
j down button
BATH FILL
TEMPERATURE
i up button
ON / OFF
button
ON / OFF
operating light
i up
button
j down
button
operating
light
ACTIVE
light
BATH FILL
indicator light
temperature
display panel
speaker
bath fill water volume
display panel