User Manual

TEMPERATURE CONTROL – DELUXE
41
Turning Off Bath Fill Function During Its Operation
The bath fill operation can be interrupted by pressing the bath fill ( ) button before completion of the bath fill
operation.
If it is necessary to turn off the Bath Fill function before the operation is complete, during Step 7:
 Press the bath fill ( ) button.
At this first press of the bath fill ( ) button:
 The operating light will go out.
 The bath fill operating light will flash.
 The voice prompt will sound;
“bath filling has been stopped, please turn off the hot
water tap and press the bath fill ( ) button to finish”
 The bath fill water volume display will go blank.
 The temperature display will go blank.
 The bath fill indicator light will go blank.
 After a few seconds, water flow from the hot tap will
cease.
 The bath fill water volume display will then show
0 litres.
 The bath fill indicator light will recommence to glow.
 Close the hot tap.
 Press the bath fill ( ) button again.
At this second press of the bath fill ( ) button:
 The bath fill operating light and bath fill indicator light
will go out.
 The bath fill water volume display will go blank.
 Note: If the hot tap has not been turned off, the voice
prompt will sound;
“please ensure the bath hot water tap is turned off”
X 10L
88
°C
X 10L
88
°C
X 10L
88
°C
X 10L
88
°C
X 10L
88
°C
X 10L
88
°C
“bath filling has been stopped,
please turn off the hot water tap
and press the
bath fill (
) button to finish”
°C
BATH (l)
BATH (l)
°C
0
°C
BATH (l)
“please ensure the bath hot
water tap is turned off”