Specifications
Table Of Contents
- Contents
- About Your Water Heater
- Water Heater Application
- Model Type
- Water Heater Operation
- Gas Boosting For A Solar Water Heater
- Mains Pressure
- How Hot Should The Water Be?
- Hotter Water Increases The Risk Of Scald Injury
- Warning
- Safety
- Precautions
- General Maintenance
- Minor Six Month Maintenance
- Annual Service
- To Turn Off The Water Heater
- To Turn On The Water Heater
- Going On Holidays
- Frost Protection
- Draining The Water Heater
- How Do I Know If The Water Heater Is Installed Correctly?
- Victorian Customers
- Does The Water Chemistry Affect The Water Heater?
- How Long Will The Water Heater Last?
- Water Supplies
- Save A Service Call
- No Display On The Controller (If Fitted)
- Cold Water From The Hot Tap
- Water Is Too Hot Or Not Hot Enough
- No Water From The Hot Tap
- Water Flow Fluctuates
- Gas Booster Operating Too Frequently
- Fan Continues To Run After Water Heater Operation Stops
- Smell Of Flue Gases
- Clouds Of White ‘Vapour’ From The Flue Terminal
- Pressure Relief Valve Discharging
- Error Code
- Higher Than Expected Gas Bills
- Installation – Water Heater
- Installation Standards
- Water Heater Application
- Water Heater Location
- Ventilation
- Secondary Flue
- Safe Tray
- Pipe Cover
- Frost Protection
- Mains Water Supply
- Preset Outlet Temperature Setting
- Hot Water Delivery
- Circulated Hot Water Flow And Return System
- Reducing Heat Losses
- Dimensions And Technical Data
- Typical Installation – Indoor Location
- Connections – Plumbing
- Flueing
- Connections – Electrical
- Multiple Installations
- Commissioning
- Draining The Water Heater
- Rheem Continuous Flow Gas Water Heater Warranty – Australia Only
- 1. The Rheem Warranty – General
- 2. Terms Of The Rheem Warranty And Exclusions To It
- 3. What Is Covered By The Rheem Warranty For The Water Heaters Detailed In This Document
- 4. Entitlement To Make A Claim Under This Warranty
- 5. How To Make A Claim Under This Warranty
- 6. The Australian Consumer Law
FLUEING
27
COMPONENTS
A complete flue system is comprised from the following components.
horizontal flue terminal
(PN 295116)
trim ring
(PN 295125)
vertical flue terminal
(PN 295117)
condensate trap
(PN 295139)
90° bend
(PN 295118)
45° bend
(PN 295119)
straight length – 300 mm
(PN 295126)
wall bracket
(PN 295129)
male to male (MM) adapter
(PN 295124)
female to female (FF) adapter
(PN 295123)
adjustable straight length – 560 to 890 mm
(PN 295127)
straight length – 900 mm
(PN 295122)