Specifications

7
SETTING THE TIMER 701 & 702 SERIES
TIMER FUNCTIONS
701 & 702 Series have 24 hour timers fitted. For 703 series go to page 15.
Function
Mode
Description
Clock
N/A
Set clock time.
STD/AUTO
STD
BWU „ON‟ 24 hours 7 days.
AUTO
BWU operates according to programmed „Set
ON/OFF Times‟.
Set ON/OFF
Times
N/A
Program ON/OFF times for AUTO mode.
Sleep Delay Time
N/A
Program delay-off time from last usage
(operates in AUTO mode only).
Filter Life*
Remaining Life
Displays remaining filter life in litres.
Filter Reset
Resets filter „Remaining Life‟ to „Set Filter Life‟
setting. Utilised when replacing filter.
Set Filter Life
Program filter life start value in litres.
Service Menu
Error Codes
Displays alpha error codes (refer to page 11 for
error codes and their meanings).
Boiling Temp
Displays the current boiling water temperature in
ºC.
Calib. Reset
Reactivates automatic boiling point calibration
operation.
Temp Override
Manually select calibrated temp setting.
Selectable from 70 – 99 ºC.
Software Version
Displays Timer and Controller software versions
(top = Timer, lower = Controller).
Temp Show
ON/OFF
Enable/disable boiling water temperature display
on timer screen (in ºC).
TB Treq
Displays boiling water temperatures in ºC. (TB =
calibrated temp, Treq = maintained temp).
* 701 and 702 Series Boiling Water Units do not have a water filter however filter life
functions can be utilised if the water supply to the BWU has a water filter fitted.
To select a Timer Mode
Press the (P) button until the desired mode is displayed on the screen. Press the (✓)
button to confirm selection. Pressing (X) button at any time returns the unit to the
main menu. Any functions previously accepted will be retained.
Note: The display will revert back to main menu from any mode if a button has not
been pressed for 1 minute.