Technical data

INSTALLATION
24
PUSH THROUGH (FREE OUTLET)
INSTALLATION
It can be advantageous to plumb
the water heater as a Push Through
water heater in some cases. These
installations can supply a single
point only and normally use a
25 litre or 50 litre electric water
heater. The temperature pressure
relief valve supplied with this heater
must be fitted to the water heater.
SADDLING PIPE WORK
To prevent damage to the cylinder when attaching pipe clips or saddles to the
water heater jacket, we recommend the use of self drilling screws with a
maximum length of 13 mm. Should pre drilling be required, extreme caution
must be observed when penetrating the jacket of the water heater.
Note: Damage to the cylinder as a result of saddling to the jacket will void
the warranty.