Specification Sheet

ManualsBrandsRheem ManualsAir Care ProductRheem 16 SEER High Efficiency - ECM Motor - Standard N Coil

Rheem High Efficiency Air Handler

FORM NO. H11-541

RHPL- Series

ECM Motor

Efficiences up to 16.5 SEER

• Includes an energy efficient GE

ECM

Motor, that slowly

ramps its speed up for quiet operation and enhanced

customer satisfaction.

• Versatile 4-way convertible design for upflow, downflow,

horizontal left and horizontal right applications.

• Nominal airflow up to 1.0" external static pressure.

• Factory-installed high efficiency indoor coil.

• Sturdy cabinet construction with 1.0 inch [25.4 mm] of

foil faced insulation for excellent sound and insulating

characteristics.

• Field-installed auxiliary electric heater kits provide exact heat

for indoor comfort. Kits include circuit breakers which meet

U.L. and cUL requirements for service disconnect.

• Dip switch settings for selectable, customized cooling airflow

over a wide variety of applications when wired in 24V conven-

tional configurations.

• On-demand dehumidification terminal that adjusts airflow to

help control humidity for unsurpassed comfort in cooling

mode.

• External filter required.

Air

Air Handlers

RHPL Series

Summary of content (12 pages)

PAGE 1
Air Air Handlers RHPL Series Rheem High Efficiency Air Handler RHPL- Series ECM Motor Efficiences up to 16.5 SEER • Includes an energy efficient GE® ECM® Motor, that slowly ramps its speed up for quiet operation and enhanced customer satisfaction. • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. • Nominal airflow up to 1.0" external static pressure. • Factory-installed high efficiency indoor coil. • Sturdy cabinet construction with 1.
PAGE 2
Air Table of Contents RHPL Series TABLE OF CONTENTS Engineering Features ......................................................................................3 Model Number Identification ............................................................................4 Dimensional Data............................................................................................5 Airflow Directional Data ..................................................................................
PAGE 3
Air Engineering Features RHPL Series Engineering Features RHPL- Series • Quiet, efficient ECM motor technology providing nominal airflow up to 1.0 inch [25 kPa] of external static pressure. • Interface board with dip switches conveniently located in the blower compartment allows for precise, field selectable airflow to meet the requirements of particular applications. • Selectable continuous fan “on” options. • The most compact unit design available. • Attractive pre-painted cabinet exterior.
PAGE 4
Air Model Number Identification RHPL Series Model Number Identification R H P L — HM 24 21 J A Design Variation A = 1st Design Voltage J = 208/240/1/60 Cabinet Size 21 = 21" [533.4 mm] (600-1200 CFM) 24 = 24.5" [609.6 mm] (1200-1700 CFM) Capacity 24 = 18,000/24,000 BTUH [5.27 to 7.03 kW] 36/= 30,000/36,000 BTUH 38 [8.79 to 10.55 kW] 48 = 42,000/48,000 BTUH [12.31 to 14.06 kW] 60 = 60,000 BTUH [17.
PAGE 5
Air Dimensional Data RHPL Series Unit Dimensions SUPPLY AIR ELECTRICAL CONNECTIONS MAY EXIT TOP OR EITHER SIDE HIGH VOLTAGE CONNECTION 7/8 [22.2 mm], 13/32 [27.8 mm], 131/32 [50 mm] DIA. KNOCKOUTS. NOTE: 24 CLEARANCE REQUIRED IN FRONT OF UNIT FOR FILTER AND COIL MAINTENANCE. 105/16 [262 mm] W A Return Air Opening Dimensions LOW VOLTAGE CONNECTION 5/8 [15.9 mm] AND 7/8 [22.
PAGE 6
Air Airflow Directional Data RHPL Series Airflow Directional Data UPFLOW HORIZONTAL LEFT HAND AIRFLOW 6 DOWNFLOW HORIZONTAL RIGHT HAND AIRFLOW
PAGE 7
Air Airflow Performance Data RHPL Series Airflow Performance Airflow performance data is based on cooling performance with a coil and no filter in place. Select performance table for appropriate unit size, voltage and number of electric heaters to be used. Make sure external static applied to unit allows operation within the minimum and maximum limits shown in table below for both cooling and electric heat operation. For optimum blower performance, operate the unit in the .3 [8 mm] to .
PAGE 8
Air Electrical Data RHPL Series Electrical Data Model HP [W] Voltage Phase Hertz RPM Circuit Amps. Minimum Circuit Ampacity Maximum Circuit Protector HM2421 HM3621 HM3821 1/3 [249] 1/2 [373] 1/2 [373] 208/230 208/230 208/230 1 1 1 60 60 60 300-1100 300-1100 300-1100 1.7 3.4 3.4 4.0 6.0 6.0 15 15 15 HM4824 HM6024 3/4 [559] 3/4 [559] 208/230 208/230 1 1 60 60 300-1100 300-1100 4.9 4.9 9.0 9.0 15 15 Electrical Data – With Electric Heat Installation of the U.L.
PAGE 9
Air Electrical Data RHPL Series Electrical Data – With Electric Heat (Cont.) Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements.
PAGE 10
Electrical Wiring RHPL Series Air Electrical Wiring Power Wiring Grounding • Field wiring must comply with the National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • This product must be sufficiently grounded in accordance with National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • Supply wiring must be 75°C minimum copper conductors only. • See electrical data for product Ampacity rating and Circuit Protector requirement.
PAGE 11
Air Limited Warranty RHPL Series GENERAL TERMS OF LIMITED WARRANTY* Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable periods stated, in accordance with the terms of the limited warranty. Parts....................................................................
PAGE 12
The new degree of comfort.™ In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Heating, Cooling & Water Heating • P.O. Box 17010 Fort Smith, Arkansas 72917 • www.rheem.com Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1 Brampton, Ontario • L6Y 0P5 PRINTED IN U.S.A 12/12 QG FORM NO.