Operating instructions

11
Users Manual
TYPICAL PROJECT WORKFLOW
PREPARATION
INSTALL RHAON
software under
Windows XP, Vista,
Windows 7
SET COMPUTERS
Static IP
Address
CHOOSE BACKGROUND IMAGE
This can make it easier to see
where Groups and Loudspeakers
are in the venue
ADD VIRTUAL SPEAKERS
or scan network for actual
loudspeakers
GROUP VIRTUAL SPEAKERS
or actual loudspeakers
found on your network
OPEN NETWORK MANAGER
To verify integrity of the Ethernet
network
CONNECT
SCAN THE NETWORK
RHAON assigns
IP Addresses as needed
ASSOCIATE VIRTUAL &
ACTUAL LOUDSPEAKERS
Drag from left panel,
drop on icon in right panel
SELECT DIGITAL and/or
ANALOG INPUTS
ROUTE COBRANET
CobraNet Source
Drag-and-Drop Tx/Rx links
BEAM STEERING
Congure and Aim
Array’s Sonic Beams
PRESETS
Control & Store Presets
CONTROL
CONTROL PANEL
Configure L oudspeaker
Array
EQUALIZATION
8-band parametric EQ,
hi-and lo-shelving
hi-pass and lo-pass
COMPRESSION
Threshold / Ratio
Attack / Release
Soft Knee / Trigger Point
DELAY
0 to 340 milliseconds @ 48 kHz
0 to 170 milliseconds @ 96 kHz
PRIORITY OVERRIDE
Attack / Release
Threshold / Hold
Engage / Disengage
SUPERVISE
OPERATOR ALERTS
RHAON indicates pr oblems
such as over temper atur e,
clipping or driver failure at S ys-
tem, Group and Loudspeaker
levels
DETAILED INFORMATION
Just click through to the
loudspeaker’s Supervise screen
to identify the nature of the
problem and take corrective
action
FAULT LOGGING
RHAON logs the fault
conditions you specify to a
le on your hard drive
OPERATOR NOTIFICATION
via e-mail or text message
(if your computer has a second
NIC with an Internet
connection)
MULTI-LEVEL PASSWORD
PROTECTION
restrict access to Connect and
Control functions
IC
2