User`s manual

VSP 1314 Use   75
Communication Firemware Upgrade
Shut the power device, switch the direction of arrow of the two dial switch
which download IP board to ON state. As shown in figure:
Connect one end of RJ11 download line to RS232 .control Connector of
video processor end access and the other end access PC serial port.
Double-click ，enter into the procedure Connector of Flash
Magic,setting in figure: First, users select the corresponding serial ports,
set baud rate as 115200, choosing device LPC2368 and loading target file
of 100 M IP board of the upgrade program. (hex. File) Then, comfirm it
through choosing two
Finally, click ―start‖ button.