User`s manual

5.System Setup and Operation
How to splicing with DVI3
VSP 1314 Use   63
6. Press the adjust knob and rotate it to select Split Output Channel,press
to enter it.There are DVI1 and DVI2.Output channel can be set
separately;
7. Repeat the above operation step,can adjust the display range of DVI3
input source.That is scale a part image of DVI3 and display on output
port.
Split Switch： ON
Split Mode： H 1/2
Split Output Channel: DVI1
Display Width： 1024
Split Switch： ON
Split Mode： H 1/2
Split Output Channel: DVI1
Display Width： 1024
Split Switch： ON
Split Mode： H 1/2
Split Output Channel: DVI1
Display Width： 1024
Display Height： 768
Display Local X： 0
Display Local Y： 0
Screen Width： 1024
Display Height： 768
Display Local X： 0
Display Local Y： 0
Screen Width： 1024