User`s manual

5.System Setup and Operation
How to set picture in picture
VSP 1314 Use   56
How to set picture in picture
Make sure equipment normal operation.Detail please refer to :How to make
equipment normal operation
PIP Functional description:
Before press, make sure signal firstly;
Such as want set VGA1 as big picture,size is::960x672，and set DVI2 as
small picture,size is:384x384,position is:X-288,Y-144
Operation as following:
1. Set VGA1 as Preview output,scale to:960x672；
2. Press TAKE to switch VGA1 as Program output;
3. Set DVI2 as Preview output,scale to:384x384,and adjust position to：
X-288,Y-144；
4. Press PIP1/PIP2,and button light up red ;
5. PIP mode 1:Press button and light up green,as following:
6. PIP mode 2:Press button and light up red,as following: