User`s manual

4.Menu Orientation

VSP 1314 Use   43

Authorized setting：This product have been useing time limited by our

company,if it is service life and need to continue to use,you must to contact

with our sales or service to get the password.

State：Authorized and unauthorized；

MENU--- OLED Luminance

Enter can set the luminance of font；

MENU--- Video Firmware Update

User can update video firmware via USB1~USB4.

MENU--- Key Pad Lock

Enter can set whether key pad lock;If open it,operating other buttons are

invalid;release it, shall also press < Menu > and < Take > key to

unlock!This function mainly in order to prevent the user misoperation.

MENU---Factory Reset

Select it, press the knob to reset factory;It will show Factory Reset Finish if

success.As picture2;

EFFECT---EFFECT Switching

Press MENU/EFFECT to enter to EFFECT if light up red ;Press the adjust

knob can set EFFECT;There are:Fade in Fde out ,CUT,Wipe Hard,Wipe

Soft Wipe Hard and Wipe Soft have 7 kinds of seamless switching

mode:Wipe Left、Wipe Right、Wipe Up、Wipe Down、Wipe Center Out、

Wipe Curtain Out、Wipe Plus Out；But only Wipe Soft have soft effect;

Cut :Cut Left、Cut Right、Cut Down、Cut Up、Cut Square、Cut Curtain、

Cut Center.It also supports the user defined switching speed;Adjustment

value range is -

Detail please refer to