User`s manual

4.Menu Orientation

VSP 1314 Use   40

When input signal to the large screen,boundary appear black side,can use

this function to adjust to make full screen display.

Select DVI1,rotate the adjust knob can choice the HDMI/DVI

interface,Default interface is DVI output.If you need HDMI output,please

select HDMI.

Select DVI1 also can choice color format,Color range of video format is

16-235,Color range of image format is 0-255.

The same method can be applied to set the DVI2 output.

Screen setting:(Including above setting):

Screen Pos X：Horizontal coordinate setting;

Screen Pos Y：Vertical coordinate setting;

Screen Width：Width setting;

Screen Height：Height setting;

Window Mode:Can switch between Screen Full .

User can use USB1~USB4 to upgrade firmware.

Output ratio：Proportional setting menu:

Normal ；4：3 aspect ratio；16：9 aspect ratio，rotate the adjust knob can

switch between aspect ratio;

Image adjustment：

light upness：Can change the light upness of the image;

Contrast：Can change the color contrast of image;

Saturation：Can change the color temperature value of image;

Color Red ：Can change the red of image;

Color Green：Can change the green of image;

Color Blue：Can change the blue of image;

User can adjust and set according to actual condition,This function mainly

suitable for professional to operate image quality. Nonprofessional dont

recommend to operate obove setting.If image quality were distortion

because of improper operation,can reply the factory setting.