User`s manual

2.Hardware Orientation
VSP 1314 Front Panel
VSP 1314 Use   31
the adjust knob,can adjust width of picture;Press V SIZE/V POS,light up
red to enter to transverse position setting,rotate the adjust knob can adjust
the positon of transverse;
LCD shows as following:
CROP：
Press SCALE/CROP，light up red to enter to scale setting;At the same time
when H SIZE\H POS light up green to enter to height setting,rotate the
adjust knob can adjuest the height percentage;Press H SIZE\H POS,light
up red to enter to vertical position setting,rotate the adjust knob,can adjuest
the veritical percentage;PressV SIZE/V POS,light up green to enter to
width setting,rotate the adjust knob can adjust the width percentage;Press
V SIZE/V POS ,light up red to enter to transverse position setting,rotate the
adjust knob can adjuest the transverse positon percentage;
Note
The percentage of CROP is the curren output
resolution percentage,after scale set full
screen.Such as resolution is: 1024x768，set
width as 50,set transverse position as 0,height
as 50,set certical position as 0.That is scale
the 1/4 picture of full screen at the top right
corner as 1024x768 output。
LCD shows as following:
DVI2 Scale HSize <1024>
Scale HPos < 0>
Scale VSize < 768>
Scale VPos < 0>
DVI2 Crop HSize < 100>
Crop HPos < 50>
Crop VSize < 100>
Crop VPos < 50>