User`s manual

2.Hardware Orientation
VSP 1314 Front Panel
VSP 1314 Use   30
save.LCD will show Load From,after finish loading, the button which
selected will light out,and other 9 lights light up still.It means can load other
infomation .Press button again the red light light out it means have exit
Load mode.
LCD shows as following:
Detail please refer toHow to load parameter
SCALE/CROP：SCALE and CROP setting muitiplexing button
Press button,light up green to enter to SCALE mode;
Press button,light up red to enter to CROP mode;
H SIZE/H POS：Height and vertical position setting muitiplexing button;
Press button,light up green to enter to height setting;
Press button,light up red to enter to vertical position setting;
V SIZE/V POS：Width and transverse position setting muitiplexing button;
Press button,light up green to enter to width setting;
Press button,light up red to enter to transverse position setting;
Three key combination use as following:
SCALE：
Press SCALE/CROP，light up green to enter to Scale setting;At the same
time H SIZE\H POS light up green,rotate the adjust knob can adjust the
hight of picture;Press H SIZE\H POS ,light up red to enter to light-vertical
position setting,rotate the adjust knob can adjust the position of
veitical;Press V SIZE/V POS ,light up green to enter to Width setting,rotate
Load From:
Press<1~10>to Load