User`s manual

2.Hardware Orientation
VSP 1314 Rear Panel
VSP 1314 Use   25
11.RS232 Interface
Used to connect the computer.
OUTPUT Interface
12.13.22.23: Gigabit copper port
Gigabit copper port, connect to LED screen.
14.24：Power supply port of Sending Card
Power has been already supplied by video processor itself, dont need
external power supply.
15.25：USB control port of sending card
16.26：DVI Input
Input the DVI out originating from other video processors.（This DVI
connector does not support hot-plugging）
20：DVI Output
Connect to the monitor or LED screen which has DVI interface（This DVI
connector does not support hot-plugging）.
21：DVI +VGA-DVI Output
Connect to the monitor or LED screen which has DVI interface.（This DVI
connector does not support hot-plugging）.
DVI +VGA , VGA output connector can be connected to monitor or
projector which has VGA interface.
Note
Via adapter,can connect with
DVI-based or VGA-based equipment, and via，
DVI to VGA adapter, can output VGA
only.